EZARC 15" Arc Edge Reciprocating Saw Blades 6TPI — 3-Pack for Pruning & Firewood, Universal Fit

EZARC 15-inch arc edge reciprocating saw blades (6TPI) are extra-long pruning blades engineered for aggressive, fast cuts through branches and firewood up to 300mm.

These 15" (370mm) blades combine a curved cutting edge, deep gullets and fleam-ground teeth to speed through wet or dry timber with less binding than a straight blade. The arc edge geometry creates multiple cutting angles and reduced friction, while the coarse 6 teeth-per-inch pitch clears debris quickly for efficient pruning, limb removal, and firewood preparation. Each pack contains three universal-fit blades designed to work with most major reciprocating saw brands (see compatibility notes).

How does the arc edge design improve pruning performance?

The curved or arc edge concentrates cutting force on a smaller contact area as the blade enters wood, letting the aggressive tooth profile bite quickly and keep momentum. Triple-ground, offset teeth present three cutting angles that slice fiber cleanly and help prevent the blade from sticking inside larger limbs.

• Arc edge focuses cutting pressure for faster starts and smoother progress.
• Triple-ground offset teeth reduce friction and the chance of binding.
• Deep gullets evacuate chips to maintain cutting speed on thick branches.

What materials and sizes will these 6TPI blades cut?

The 6TPI coarse tooth pitch and 4.1mm tooth spacing are optimized for wood applications where rapid material removal is required. Expect strong performance on wet or dry wood, green timber, and seasoned firewood; large-diameter limbs up to roughly 300mm (about 12") are within the blade's practical cutting range.

• Effective on wet, dry and green wood as well as firewood processing.
• Working length ~320mm allows cuts through substantial branch diameters.
• Not intended for fine metal cutting or precise finish work.

Will these blades fit my reciprocating saw and how durable are they?

EZARC designed these blades with a universal shank profile that mates with most major reciprocating saw brands, enabling quick swaps in cordless or corded saws. The fleam-ground tooth geometry and deep gullets promote aggressive cutting and extended life compared with standard pruning blades, though they are optimized for timber rather than hardened metals or nails.

• Compatible with DeWalt, Bosch, Makita, Black & Decker, Milwaukee, Porter Cable, Skil, Hitachi, Metabo.
• Currently not compatible with Ryobi reciprocating saws — check your saw’s shank acceptance.
• Fleam-ground teeth and deep gullets for longer wear and faster chip removal.

How should I use and maintain these blades for best results?

Use steady, moderate pressure and let the blade’s aggressive tooth geometry do the work; forcing the saw increases heat and dulling. Clear sap and debris after heavy use, avoid cutting through embedded metal, and store blades dry to slow corrosion and preserve cutting life.

• Apply consistent feed pressure — avoid forcing the blade.
• Inspect and remove nails or screws from wood before cutting.
• Clean and dry blades after use; replace when teeth show wear or damage.

Who is this for? These EZARC 15" arc edge reciprocating saw blades suit landscapers, arborists, homestead owners, and weekend woodcutters who need a fast, rugged blade for pruning and firewood tasks. If you need quick, aggressive cuts through medium to large limbs and want a universal-fit option that outlasts basic blades, this 3-pack is a practical, cost-effective choice. Choose these blades when you prioritize cutting speed and chip clearance over fine-finish cutting.