PC Products Wood Repair Epoxy Kit — PC-Woody 12 oz & PC-Petrifier 16 oz, Wood Hardener and Sandable, Paintable Repair

PC-Woody epoxy paste and PC-Petrifier water-based hardener restore and rebuild rotten or missing wood for lasting interior and exterior repairs.

When timber has softened, crumbled, or lost structural strength from rot, insect damage, or weathering, this two-product kit gives you a practical repair workflow: first consolidate weak fibers with a low-viscosity hardener, then rebuild and shape missing sections with a two-part epoxy paste that machines, sands, and accepts paint or stain once cured. The kit combines a 16 oz bottle of PC-Petrifier, designed to soak into and stabilize degraded wood, with a 12 oz container of PC-Woody, a wood-filled epoxy paste formulated to match the strength and workability of real wood for permanent repairs.

How do these two products work together to fix rotten wood?

PC-Petrifier penetrates deteriorated wood fibers to firm them up and create a sound substrate. After the hardener sets, PC-Woody fills voids, replaces missing sections, and bonds to the consolidated wood for a unified repair that can be finished to match surrounding woodwork.

• PC-Petrifier: low-viscosity, water-based, soaks deep into soft wood.
• PC-Woody: two-part paste epoxy with real wood content for strength.
• Sequence: saturate rotten area, allow cure, then pack with epoxy paste.
• Finishable: sandable, paintable, stainable, and machinable after cure.

What kind of damage and locations is this kit suited for?

The kit is designed for a broad range of common wood failures where rot or material loss has occurred. Use it on trim, sills, frames, fascia, decorative beams, and furniture where consolidation plus rebuild is needed for a durable repair.

• Exterior and interior wood: window sills, door frames, porch posts.
• Decorative woodwork: molding, balusters, carved trim.
• Log homes and furniture repairs needing structural refill and shaping.
• Prep surfaces for painting and sealing after treatment and cure.

How long does each product take to work and how do you apply them?

PC-Petrifier is applied first and allowed time to penetrate and cure; the exact cure depends on temperature and wood condition. PC-Woody is a two-part epoxy paste mixed at the job site, applied to fill gaps, and left to harden before finishing.

• Application: brush or pour PC-Petrifier into exposed rot until absorbed.
• Cure: allow adequate penetration and drying before applying epoxy paste.
• Mixing: combine epoxy base and activator per product instructions; knead to uniform color and apply.
• Finish: sand, drill, saw, paint, or stain the cured epoxy to match surroundings.

Will this repair hold up outdoors and with treated wood?

PC-Woody is formulated to resist common exterior stressors, and PC-Petrifier’s water-based formulation helps protect exposed grain. Together they provide a weather-resistant repair, but proper sealing and paint or stain is recommended for long-term UV and moisture protection.

• Resistance: designed to withstand weather, mildew, UV exposure, and salt- or fresh-water contact.
• Compatibility: bonds to pressure-treated and aged wood after preparing with the hardener.
• Protection: finish with exterior-grade paint or stain for best longevity.
• Durability: cured epoxy machines and fastens like solid wood for structural repairs.

Who is this kit for? The PC-Products PC-Woody and PC-Petrifier kit suits homeowners, carpenters, restoration specialists, and DIYers who need a reliable method to consolidate rotten wood and recreate lost material without replacing entire components. If you want a long-lasting, workmanlike fix that can be shaped, sanded, and finished to match existing wood, this bundle provides the consolidation and rebuilding steps needed for professional-looking repairs.